PVC Fittings Series

PVC Fittings Series


Specialized PVC Process – Standard TECHMATION control system, the control procedure is special designed for PVC fitting.
Widened Door – Widened safe door makes easier for removal of PVC fitting .
PVC Screw – Specialized PVC Screw solve the problems of drawing and yellowing of PVC products effectively.



Introduction


Powerjet new type PVC fitting injection molding machine are specialized for different sizes of PVC fitting. Saving 30%~50% of energy by using servo motor and more device options are available to fulfill customer requirements.

Clamping Force – 90~680(Ton)
Shot Weight(PVC) – 179~2847(g)
Applications – PVC Fitting

Features:

Air Cooling – Excellent air cooling control improve the stability of PVC heat-sensitivity molding process.
Plasticization Precision – The charge adopts high torque and low speed motor, which improves the plasticization precision.
Servo & Variable Drives – Servo and Variable pump are available according to every production conditions.
Core Pulling – Standard two sets of core pulling, more sets of core pulling are available.
Temperature Control – Solid state replays for temperature control is used to ensure that the barrel temperature is controlled within a reasonable range.


 

Details 


1: Servo & Variable Drives – Servo and Variable pump are available according to every production conditions.
 

2: Widened Door –Widened safe door makes easier for removal of PVC fitting.
 


3: Core Pulling –Standard two sets of core pulling, and optional for more sets.
 

4: Specialized PVC Process – Standard TECHMATION control system, the control procedure is special designed for PVC fitting.

 

 

5: PVC Screw –Specialized PVC Screw solve the problems of drawing and yellowing of PVC products effectively.
 

6: Air Cooling – Excellent air cooling control improve the stability of PVC heat-sensitivity molding process.
 

7: Plasticization Precision –The charge adopts high torque and low speed motor, which improves the plasticization precision.
 

8: Temperature Control –Solid state replays for temperature control is used to ensure that the barrel temperature is controlled within a reasonable range.
 


Platen Dimensions 

 

 

Application 

PVC /PPR/UPVC pipe fittings, etc.



 
International size rating   900-400 1260-400 1600-600 2000-930 2880-1500 3300-1900 4000-2500 5000-3600 5600-4000 6800-5400
CLAMPING UNIT                   
Clamping force KN 900 1260 1600 2000 2880 3300 4000 5000 5600 6800
Opening stroke mm 320 350 440 490 550 600 710 830 860 930
Max.daylight mm 680 750 940 1040 1160 1300 1440 1680 1740 1870
Platen size mm×mm 540x540 610x610 705x705 775X755 850x850 985x985 1050x1050 1150x1120 1250x1220 1340x1340
Space between bars mm×mm 360x360 410x410 460x460 510X510 610x610 670x670 740x720 820x780 860x860 930x930
 Max.mold height mm 360 400 500 550 610 700 730 850 880 940
Min.mold height mm 130 145 160 230 280 300 300 300 300 350
Ejector stroke mm 100 100 140 140 145 180 210 220 240 265
Ejector force KN 34 42 49 65 77 77 110 135 135 184
INJECTION UNIT                      
Screw diameter mm 40/45 40/45 45/50 50/55 55/60 60/65 70/75 80/85 80/85 90/95
L/D Screw L/D Ratio L/D 22/20 22/20 22/17.4 21.7/20 21.6/20 21.6/20 21.5/20 22/20.9 22/20.9 21.9/20.7
Injection Pressure Mpa 197/156 197/156 185/150 194/161 221/186 220/187 196/171 186/164 186/164 190/170
Shot volume cm³ 201/254 239/302 326/403 481/582 665/792 877/1029 1270/1458 1960/2213 2187/2468 2863/3190
(PS)  Shot weight(ps) g(克) 179/227 213/270 291/360 429/519 594/707 783/918 1133/1301 1749/1975 1952/2203 2555/2847
  OZ(盎司) 6.3/8.0 7.5/9.5 10.3/12.7 15.1/18.3 20.9/24.9 27.6/32.4 40/45.9 61.7/69.7 68.8 90.1/100.4
Injection rate  g/sec 71/99 87/124 116/160 138/184 173/231 213/270 282/352 374/456 77.7 447/499
Plasticing capacity g/sec 16/23 20/31 24/34 40/54 46/59 63/74 69/84 91/107 91/107 91/114
Screw stroke mm 190 190 205 245 280 310 330 390 435 450
Screw speed rpm 135 164 165 147 147 159 118 133 133 136
POWER UNIT                      
Hydraulic system Pressure Mpa 17.5 17.5 17.5 17.5 17.5 16.5 17.5 17.5 17.5 17.5
Pump motor power KW 11/11.2 11/14.1 15/16.1 18.5/21.8 33/40.1 30/53.3 37/53.3 45/57 45/57 55/25.1+30.8
 Heater power KW 8.68 8.68 12 14.04 15.95 19.84 22.95 31.3 31.3 39.7
GENERAL                  
Oil tank capacity L 180 210 260 340 420 460 630 810 810 1000
Machine weight Ton 3 3.2 4.6 6.2 8.2 10.3 15 18.5 23 26
Machine dimensions(L×W×H) m×m×m 4x1.38x1.7 4.4x1.46x1.8 4.8x1.75x1.8 5.3x1.9x2.1 5.85x2.1x2.03 6.2x2.2x2.2 7.2x3.35x2.3 8.5x2.5x2.3 8.7x2.6x2.3 9.1x2.7x2.5
 International size rating   900-400 1260-400 1600-600 2000-930 2880-1500 3300-1900 4000-2500 5000-3600 5600-4000 6800-5400
CLAMPING UNIT                   
Clamping force KN 900 1260 1600 2000 2880 3300 4000 5000 5600 6800
Opening stroke mm 320 350 440 490 550 600 710 830 860 930
Max.daylight mm 680 750 940 1040 1160 1300 1440 1680 1740 1870
Platen size mm×mm 540x540 610x610 705x705 775X755 850x850 985x985 1050x1050 1150x1120 1250x1220 1340x1340
Space between bars mm×mm 360x360 410x410 460x460 510X510 610x610 670x670 740x720 820x780 860x860 930x930
Max.mold height mm 360 400 500 550 610 700 730 850 880 940
Min.mold height mm 130 145 160 230 280 300 300 300 300 350
Ejector stroke mm 100 100 140 140 145 180 210 220 240 265
Ejector force KN 34 42 49 65 77 77 110 135 135 184
INJECTION UNIT                      
Screw diameter mm 40/45 40/45 45/50 50/55 55/60 60/65 70/75 80/85 80/85 90/95
L/D Screw L/D Ratio L/D 22/20 22/20 22/17.4 21.7/20 21.6/20 21.6/20 21.5/20 22/20.9 22/20.9 21.9/20.7
Injection Pressure Mpa 197/156 197/156 185/150 194/161 221/186 220/187 196/171 186/164 186/164 190/170
Shot volume cm³ 201/254 239/302 326/403 481/582 665/792 877/1029 1270/1458 1960/2213 2187/2468 2863/3190
(PS)  Shot weight(ps) g(克) 179/227 213/270 291/360 429/519 594/707 783/918 1133/1301 1749/1975 1952/2203 2555/2847
  OZ(盎司) 6.3/8.0 7.5/9.5 10.3/12.7 15.1/18.3 20.9/24.9 27.6/32.4 40/45.9 61.7/69.7 68.8 90.1/100.4
Injection rate  g/sec 71/99 87/124 116/160 138/184 173/231 213/270 282/352 374/456 77.7 447/499
Plasticing capacity g/sec 16/23 20/31 24/34 40/54 46/59 63/74 69/84 91/107 91/107 91/114
Screw stroke mm 190 190 205 245 280 310 330 390 435 450
Screw speed rpm 135 164 165 147 147 159 118 133 133 136
POWER UNIT                      
Hydraulic system Pressure Mpa 17.5 17.5 17.5 17.5 17.5 16.5 17.5 17.5 17.5 17.5
Pump motor power KW 11/11.2 11/14.1 15/16.1 18.5/21.8 33/40.1 30/53.3 37/53.3 45/57 45/57 55/25.1+30.8
Heater power KW 8.68 8.68 12 14.04 15.95 19.84 22.95 31.3 31.3 39.7
GENERAL                  
Oil tank capacity L 180 210 260 340 420 460 630 810 810 1000
Machine weight Ton 3 3.2 4.6 6.2 8.2 10.3 15 18.5 23 26
Machine dimensions(L×W×H) m×m×m 4x1.38x1.7 4.4x1.46x1.8 4.8x1.75x1.8 5.3x1.9x2.1 5.85x2.1x2.03 6.2x2.2x2.2 7.2x3.35x2.3 8.5x2.5x2.3 8.7x2.6x2.3 9.1x2.7x2.5
Preparing information. .
Preparing information. .

Recommend Products